ADHESIVE ABILITY OF GYPSUM-CONTAINING PLASTER COMPOSITIONS

Abstract

The traditional material for the construction of buildings in the Northern Black Sea region is a cheap local stone ‒ limestone-shell rock. Most of the buildings in the central part of the city of Odesa, which are of historical and architectural value, are constructed of this material. With proper care and maintenance, these structures can perform their functions for hundreds of years, but as a result of shell rock moisture due to negligent operation and a number of other reasons, the supporting structures are damaged, followed by the collapse of the building. In many cases, the direct cause of the destruction of load-bearing walls is the damage or absence of the outer plaster layer. Repairing walls with cement compounds exacerbates the problem. The article discusses some aspects of the possible use of gypsumbased composite materials for repairing damaged walls of limestone-shell rock buildings. The requirements for the repair composition are formulated. The expediency of using gypsum as a binder for the repair plaster mixture for exterior repairs is substantiated. An ash-gypsum-cement composition was used to increase the water resistance of the plaster. Sufficient water resistance and vapor permeability of the proposed composition were confirmed. This paper presents the results of studying the adhesive strength of the contact of the developed composition with the surface of various materials. Methods and measuring equipment developed at the ODABA were used. The adhesion strength of the proposed mixture with the surface of shell rock is close to the standard strength. The use of the adhesive additive Ceresit CC 81 increases the adhesive strength of the joint of the proposed composition with shell rock by 1.5 ‒ 2 times. The optimal amount of the adhesive additive to be introduced will be determined by the results of a multifactorial experiment to study the effect of a complex of chemical additives of different functional purposes on the properties of the proposed repair composition.